Inno Firmware Update
July 3, 2006
Satellite Standard group keeps you informed.
The popular Pioneer Inno has a new firmware update. Before running the update users should read the following to ensure that they agree with the updates taking place, as it does change some capabilities of the unit.
The update is version 1.16.
Release notes:
If you are upgrading from Pioneer Inno with software version 1.05, the following changes are included in this XM software upgrade version v1.16:
(1) Due to regulatory issues, as a result of this upgrade, the FM modulator feature will not be available when theunit is used in the portable mode or when the unit is used in the home dock. The FM modulator will now operate only if the unit is placed in the optional cardock. If this upgrade is not acceptable to you by reason of the loss of the FM modulator outside of the car dock, you may return your unit for a full refund by contacting XM at 1-866-259-9771. (This offer isavailable only to consumers who purchased a Pioneer Inno XM Satellite Radio with software version 1.05.)
(2) The factory default frequency for the FM modulator waschanged to 97.9.
(3) An issue in which scheduled recordings would sometimes not initiate unless the radio was powered up first in the home dock has been addressed.
(4) Users will now be able to play MP3 and WMA files without XM subscriber activation.
(5) The upgrade provides support for certain MP3 id3v2.3extended headers that had previously resulted in continuous 'scanning files' message.
(6) An issue in which the radio sometimes froze when a USBcable was connected in the midst of powering down has been addressed.
(7) An issue was corrected in which quickly selecting 2un-used XM channel numbers in a row with the remotecontrol would cause the radio to change back and forthbetween these 2 channels until a subsequent valid channel selection was made.
(8) An issue in which artist names longer than 16 charactersresulted in incorrect tune-select pop-up text has beenaddressed.
(9) An issue in which the radio would sometimes freeze on the start-up screen after playing music from a playlistfollowed by a hard restart has been addressed.
(10) The time required for the radio to power up automaticallywhen the USB cable is connected has been reduced.
(11) A screen advisory has been added during firmware updates, telling the user to keep radio connected to external power source until the firmware update iscomplete.
(12) A screen advisory has been added during a change in thememory partition, telling the user to keep the radioconnected to external power source until memoryrepartition is complete.
(13) If unit is in USB mode and activated over the air, "scanning files" will not occur. (Scanning files willoccur when USB is disconnected.)
(14) The scanning files dialog box was made larger to cover the animation graphic. Please select 'CONTINUE' to accept these changes and continue the upgrade, or 'CANCEL' to cancel. By selecting "CONTINUE", you are agreeing to accept all the changes listed above. If you have any questions regarding this upgrade please contact XM at 1-866-259-9771.
7/03/2006 09:41:00 PM
SSG Has Merged. You Can Read All Of The Latest SSG Content By Clicking Here
0 Comments:
SSG is not a Financial Advisor. Read Disclosure: HERE
--------------------------------------------------------
